12V100Ah Large Capacity Custom Battery Packs
Lithium Battery For RV Starting
Why Choose Us
1. Experience--More than 15 years Specialized in lithium battery, with own factory and R&D team
2. Certification--CE,UL,MSDS,Test Report from National Center For
Quality Supervision and Inspection of Battery Products approved.
3. Quality Control-- 37 production process,7 steps quality check to
promise stable quality and high reliability for you.
4. Best Material-- Insist on choosing top quality cell, material
and accessories,lithium battery last longer time.
5. Fresh battery-- All battery is fresh Production.
Battery Description
| ItemsItems | Parameter |
| Battery Type | LiFePO4 |
| Nominal Voltage | 12.8V |
| Nominal Capacity | 100Ah |
| Energy | 1.28KWh |
| Internal Resistance | ≤20mΩ |
| Series & Parallel Application | up to 4 series 4 parallel connected application |
| Limited Charge Voltage | 14.6±0.2V |
| Floating Charge Voltage | 13.8±0.2V |
| Charge Method | CC/CV |
| Discharge Cut-off Voltage | 10.0V |
| Standard Charge Current | 100A |
| Max. Charge Current | 100A |
| Standard Continuous Discharge Current | 80A |
| Max. Continuous Discharge Current (<30min) | 100A |
| Pulse Discharge Current (<3s) | 350A |
| Cycle Life | > 2000 cycles |
| Dimension (mm) | Length: 323±2 Width: 171±2 Height: 232±2 |
| Weight | 13±0.2Kg |
| Charge Temperature Range | 0~45℃ |
| Discharge Temperature Range | -20~60℃ |
| Recommended Operating Temperature | 15~35℃ |
| Self-Discharge Rate (Residual capacity) | ≤3%/month; ≤15%/years |
| Self-Discharge Rate (Reversible capacity) | ≤1.5%/month; ≤8%/years |
| Storage Temperature & Humidity Range (Less than 1 month) | -20~35℃, 45~75%RH |
| Storage Temperature & Humidity Range (Less than 3 months) | -10~35℃, 45~75%RH |
| Recommended Storage Temperature & Humidity Range | 15~35℃,45~75%RH |
Application
♦Solar Systems;
♦Energy Storage System ;
♦Electric Vehicles
♦Home appliance products
♦Outdoor sports products
♦Consumer applications, communicate & telephone equipment
♦Power tools
♦Electric scooter,
♦Golf carts,
♦Electric wheelchair
♦Portable small appliances,
♦Electric tools, toys, robot etc
♦Emergency light,dive flashlight,Solar lawn lamp,LED light, lawn
mower.
Battery Pictures
Standard Test Conditions
Battery test must within 1 month after production.
All test in this specification should be in standard atmospheric
conditions:
Temperature:25± 5℃, relative humidity: 60±25%.
Electrical Performance
| Test Items | Test Methods | Test Standards |
| Capacity retention rate | After standard charge under 5.1 specified conditions, store the
cells for 28 days, then discharge at 0.2C(A )to cut-off voltage. | Capacity retention rate≥95% |
| Cycle Life | Standard charge at 0.2C(A),rest 0.5~1 h,discharge at 0.2C to cut
off voltage rest 0.5~1h, repeat the above steps until 2000 cycles. | Capacity retention rate≥80% |
Attentions
(1) Do not immerse the battery in water, and keep the battery in a
cool dry surrounding if it stands by.
(2) Do not use or leave the battery at high temperature as fire or
heater. Otherwise, it can overheat or fire or its performance will
be degenerate and its service life will be decreased.
(3) Do not reverse the position and negative terminals.
(4) Do not connect the battery electrodes to an electrical outlet.
(5) Do not short circuit. Otherwise it will cause serious damage of
the battery.
(6) Do not transport or store the battery together with metal
objects such as hairpins, necklaces, etc.
(7) Do not use the battery in a location where static electricity
and magnetic field is great, otherwise, the safety devices may be
damaged, causing hidden trouble of safety.
(8) Please use special lithium charger.
(9) It should be noted that the cell would be possible to be at a
over-discharged state by its self-discharge characteristics in case
the cell is not used for long time. In order to prevent
over-discharging, the cell shall be charged periodically to
maintain about 13.2V(Recommended 3 months one
cycle).Over-discharging may causes loss of cell performance,
characteristics, or battery functions.
(10) Do not disassemble battery.
